Quick guide to the SaveWatch Plus 2: how to charge it, insert the nano-SIM, change the language, fit the straps and register it in the SaveFamily Connect app, with the app’s main features, fixes for common problems and safety warnings.
Important information
- Battery charging: Use the charger and the 5V/1A power adapter supplied in the watch’s box. Do not charge the device with an adapter rated above 5V/1.5A, as this can damage the battery. Charge for a maximum of 4 hours. Try not to use the watch when the battery is below 5%. Never charge the battery while the watch is wet or damp. The smartwatch battery contains lithium, a flammable material that requires proper handling.
- Battery life: Approximately 24 hours with moderate use. To extend it, reduce the brightness, turn off Wi-Fi and Bluetooth when not in use, and space out location tracking and health measurements.
- Water resistance: For use in fresh water only, to a maximum depth of 1.5 metres for up to 30 minutes. Improper use can permanently damage the device. The warranty does not cover water damage. Not suitable for water activities. Make sure the SIM card cover is securely in place and in perfect condition, to keep the device watertight.
- SIM: Nano-SIM size. Single line only; duplicate or multi-SIM cards are not supported. For the device to work correctly, the SIM needs a data allowance (at least 500 MB) and call credit. We recommend the SaveFamily SIM card to enjoy its added benefits.
- Warranty: To claim the warranty, the device must not have been tampered with. Do not try to open or take the watch apart: it contains small parts that can be a choking hazard if swallowed, and mishandling its internal components can cause irreversible damage.
- Extreme temperatures: Do not expose the smartwatch to temperatures above 40 °C or below 0 °C, or to direct sunlight for long periods: this can damage the battery and the internal components.
- Recycling: Do not dispose of the device or its battery with household waste. The lithium battery must be recycled according to local regulations, at authorised electronic-waste recycling points.
- Chemicals: Keep the device away from detergents, oils and industrial cleaners, as these can damage the watch’s materials and affect how it works.
Grupo SaveFamily S.L. is not responsible for misuse of the device. This smartwatch is not a medical device: its data is for guidance only. Consult a doctor if you notice anything unusual about your health.
SIM installation
SaveFamily watches need call and data credit to work correctly (this matters for the device to function properly). The SIM size is nano-SIM.
Always insert the card with the watch switched off, into the slot on the side of the watch, with the chip facing up and the notch facing inward. You should hear a “click” as you press the card fully in — this confirms it’s inserted correctly. You can see how in this video.
If your SIM card is not a SaveFamily SIM, please remove the PIN from the SIM using a mobile phone before inserting it (how to remove the PIN). Make sure it has data and coverage. This will prevent installation errors.
Box contents
Check that your box contains the following items. Accessories must be genuine SaveFamily accessories for the watch to work correctly.
- SaveFamily watch
- Power adapter
- USB cable
- Removable SIM cover
*Subject to change.
Change your smartwatch’s language
- Go to the Settings menu.
- Swipe up to the Languages icon and change your device’s language. If it does not appear in the main list, go to “More”.
You can also change the language from the app.
How to fit the straps
The SaveWatch Plus 2 is compatible with both a fabric strap and a silicone strap.
- Step 1: Slide the metal clasp and fit the buckle into the holes.
- Step 2: Adjust the strap to fit your model.
Register the watch in the app
The most recent SaveWatch Plus 2 watches are managed with the SaveFamily Connect app, and some with SaveFamily Classic. Before you start, check which one yours needs: see Which app does my watch need?
Download the app your watch needs:
| App | Android | iPhone |
|---|---|---|
| SaveFamily Connect | Google Play | App Store |
| SaveFamily Classic | Google Play | App Store |
These steps are for SaveFamily Connect.
Create an account
- Personal information: fill in your name, surname and date of birth. You will be the administrator. For this reason, the account must be in the name of a responsible adult.
- User: enter your phone number and email address and accept the conditions.
- Security: choose your password. You can now log in and link devices as the account administrator.
Register the watch
- User profile: the name, photo and relationship or connection to the person wearing the watch.
- Physical details: date of birth, gender, height and weight, needed for accurate health readings.
- Scan the code: scan the watch’s QR code or barcode, or type in the alphanumeric code by hand. You’ll find it on the box or on the watch.
- Connectivity check: the watch needs an active internet connection, through the mobile network (SIM) or Wi-Fi.
- Account verification: you’ll receive a security code by email. Enter it; if it doesn’t arrive, you can request a new one or change your contact details.
- Profile summary: check the details and the linked watch model. You can add another profile at this step.
- Final setup: sign-up can take up to 10 minutes. You’ll get a notification once it’s done.
Reset your password: on the login screen, tap “Forgot your password?”, enter your email and open the link we send you to set a new password. The link expires: if you get an error, request a new one.
You’ll find more help with the app in the SaveFamily Connect section.
Main app features
Map
- Safe zone: set a radius around a place and get a real-time alert when the watch enters or leaves it.
- Frequent places: locates the watch better indoors, where GPS can struggle, by detecting nearby networks and saving battery. It doesn’t send alerts. You can use a safe zone and a frequent place for the same location, such as your home.
- History: shows the watch’s route on the map throughout the day, with its movements and stops.
- Find device: makes the watch ring so you can find it if it goes missing.
- Refresh: gets the position instantly, without waiting for the next update. A longer update interval saves battery. From the map you can also choose the map type (standard or satellite) and share the watch’s location.
Security
- Whitelist and call blocking: the whitelist is your list of approved numbers (there must always be at least one). With blocking on, only those numbers can call the watch; all other calls are rejected and you get an alert. Add the contacts first, then turn on blocking.
- Remote listening: the watch calls your phone and lets you hear what’s happening around it, without ringing or showing anything. The audio is not recorded. Not available on all models or in all countries.
- Remote image: request a photo and the watch takes it right away, with no warning. Photos are saved in the app. Not available on all models.
- SOS contacts: up to three numbers, including an emergency number (for example, 112). When SOS is activated, the watch calls the first contact, then the second, and the third if there is no answer. If any contact answers the phone, the process is interrupted. If no one answers, the cycle repeats twice and the call ends. Without saved contacts, the watch calls no one.
- Dial keypad: you can remove it so the watch can only call saved contacts.
- GPS tracking: you can turn it off, but the watch then stops sending its position and zone alerts stop working.
Other features
- Health: steps, heart rate and other health readings, with their history; you can request a reading on demand or schedule it. The pedometer keeps a history of distance, calories, active days and streaks, and you can set a daily goal. It needs the wearer’s height and weight.
- Activities: schedule the day’s routine (class, homework, meals, sleep) and the watch gives a reminder at the right time.
- Apps: decide which apps the watch can use and at what times, and see how much time is spent on each one.
- Chat: the app creates two chats per watch: a private one between you and the watch, and a group chat with every authorised user.
- Calls and alarms: call the watch by voice or video call, check its call history and set alarms at any time and on any days you like.
- Friends: the watch can connect with up to four friends, and you decide which ones stay.
- Applause: send applause to the watch as a reward when they do something well.
- Class Mode / Do Not Disturb: mutes the watch on the days and time slots you choose. Only SOS contacts get through.
- Settings: watch and app language (they’re independent), sounds, power saving with a night mode (no networks from 22:00 to 6:00), remote power off, restart and factory reset (reset erases everything), Wi-Fi networks, wallpaper, time zone and administrators. This is also where you’ll find the watch’s registration code, which Support will ask for if you call us.
Help Desk
Can’t register the watch
- Make sure you’ve entered the REGCODE correctly.
- If you’re registering the device under a different user, the primary user must authorise that registration.
The device isn’t connecting to the internet
- Check that the SIM has data access.
- Insert the SIM into a phone and turn off that phone’s Wi-Fi.
- Now try browsing the internet. Turn on data roaming if needed.
Battery doesn’t last
- Make sure you’re using a 5V/1A power adapter.
- Check that the SIM has active data credit.
Set up the APN
If the device’s internet data is not activated automatically, set it up on the watch in Settings > Mobile network > APN. You can check the APN codes.
You can also check our frequently asked questions. If you need help, contact us.
Safety warnings
- Lithium battery: The smartwatch’s battery contains lithium, a flammable material that requires proper handling. Only use the charger supplied with the device. Using unofficial chargers can cause overheating, fire, or even explosions.
- Extreme temperatures: Do not expose the smartwatch to extremely high or low temperatures. Temperatures above 40 °C or below 0 °C can damage the battery, reducing its charging capacity and the device’s lifespan.
- Recycling and correct disposal: Do not dispose of the device or its battery with household waste. The lithium battery must be recycled according to local regulations. Use authorised electronic-waste recycling points.
- Do not disassemble the device: Do not try to open or take apart the watch. The smartwatch contains small parts that can be a choking hazard if swallowed, and mishandling its internal components can cause irreversible damage to the device.
- Water protection: Although the device is water-resistant, it is not suitable for prolonged water activities or for submersion in hot water. Avoid direct exposure to salt water, chlorine, or soaps, which can damage its protective seals.
- Keep away from chemicals: Avoid letting the device come into contact with harsh chemicals such as detergents, oils, or industrial cleaners, as these can damage the watch’s materials and affect how it works.
- Do not leave in direct sunlight for long periods: Do not leave the smartwatch exposed to direct sunlight for extended periods, such as inside a car or on outdoor surfaces. Direct sunlight can overheat the device and damage its internal components.