If your SaveFamily watch is not charging correctly, follow these steps in the order indicated to identify and resolve the issue.
1. Cleaning the contacts and the cable
- Use a cotton swab with isopropyl alcohol to clean the metal contacts on the watch and the charging cable.
- Dry both surfaces thoroughly before reconnecting.
2. Charging procedure
- Turn off the watch completely.
- Place it face down on a flat surface.
- Connect the charger, making sure the magnetic contact is properly secured.
- Press and hold the power button for 40 seconds.
- Leave the watch charging for 4 to 5 hours, even if the screen does not show a charging indicator during this time.
3. Checking the charger and power source
- Test the charging cable on another USB port or a different wall charger.
- If you have another SaveFamily charging cable, test it to rule out the cable as the cause of the problem.
If the problem persists after following these steps, please contact our Customer Support team.