You can have the watch send its position every 5, 10 or 30 minutes or every hour, from "Settings" › "Location frequency". We recommend "10 minutes". The more often it sends it, the more up to date the location will be, but the more battery it will use.
The location update frequency is the time interval the watch uses to send its position to the app automatically. The more often it sends its position, the more up to date the location you see on the map will be, but it will also use more of the watch's battery and resources.
Step-by-step guide to setting the location update frequency:
- Open the app and tap the watch
- Go to "Settings" and look for "Location frequency"
- Select the automatic location update frequency you prefer. The available options are:
- 5 minutes
- 10 minutes
- 30 minutes
- 1 hour (60 minutes)
- Once you have selected the frequency, the app sends the command to the watch, which will start sending its position at the newly set interval
Important: the relationship between frequency and battery
"Bear in mind that the lower the update frequency (that is, the more often it sends its position), the more resources the watch uses, and this affects battery life."
| Frequency | Battery use | Location accuracy |
|---|---|---|
| 5 minutes | Very high | Very up to date |
| 10 minutes | High | Up to date |
| 30 minutes | Medium | Sufficient |
| 1 hour | Low | Less up to date |
Recommendations:
- For everyday use, we recommend 10 minutes.
- If you need more precise tracking because the child is on a trip or in an unfamiliar place, you can temporarily increase it to 5 minutes and switch back to 10 minutes afterwards to save battery.
- If the battery runs down too quickly, check the frequency you have set and change it to a longer interval.
- For a more precise location, keep the "LBS" option turned off in "Settings".